Toll Free: 1-888-878-0686

PWM Drivers

MPC1 single coil PWM driver

Microprocessor – based PWM electronic driver for remote control of a single proportional solenoid valve

product details

  • Current to the solenoid is independent from any change in the coil resistance or in the supply voltage
  • Inherent superimposed dither frequency helps to overcome friction and stiction effects in the controlled device
  • Supply line is protected against reversed polarity and load dump
  • Input is protected against short circuits to GND and supply
  • Operating voltage: 8.5 – 30 Vdc
  • Max current consumption: 100 mA (no load applied)
  • Pannel mounted and Direct Coil mount versions

Download PDF


Product Image

A2-MPC1 dual coil PWM driver

Microprocessor – based PWM driver for remote control of a dual-coil proportional solenoid valve

product details

  • Current in the solenoid is independent from any change in the coil resistance or in the supply voltage
  • Inherent superimposed dither frequency helps to overcome friction and stiction effects in the controlled device
  • Supply line is protected against reversed polarity
  • Input is protected against short circuits to GND and supply
  • Operating voltage: 8 – 32 Vdc
  • Max current consumption: 100 mA (no load applied)

Download PDF


Product Image

A4-MPC2 4 Coil PWM Driver

Microprocessor – based PWM driver for remote control of two dual-coil proportional valves with auxiliary triggered outputs for two on/off valves.

product details

  • Specifically designed for general purpose applications requiring easy field-adjustments
  • 12 Vdc and 24 Vdc systems
  • Remote control of proportional valves
  • Control of a 2 functions proportional bi-directional system
  • Operating voltage: 8.5 – 30 Vdc
  • Max current consumption: 100 mA (no load applied)

Download PDF


Product Image

08-MPC4 8 Coil PWM Driver

Product Description: Microprocessor – based PWM driver for remote control of 4 dual-coil proportional solenoid valves.

product details

  • Specifically designed for applications with factory-set working parameters and requiring no field-adjustments.
  • 12 Vdc systems only
  • Remote control of proportional valves
  • Control of a 4 functions proportional bi-directional system
  • Operating voltage: 9 – 20 Vdc
  • Max current consumption: 100 mA (no load applied)

Download PDF


Product Image

Featured Case Study

Featured Case Study Falcon Equipment
As the power infrastructure ages, maintaining power lines is becoming more labor intensive and the need for increased productivity and higher levels of safety is ever increasing. BC Hydro required a control system that would be safe to operate in close proximity to high voltage power lines while they are still active... read more »