Toll Free: 1-888-878-0686

Pressure Compensators

2 Way By-Pass Type for 3 Way Flow Control

Typical application for the PCR, PCA and CP3 is in a proportional circuit to achieve pressure compensated flow control or as main stage of a ventable relief valve.The pressure compensator is -pass located and is spring biased to a closed position. The PCA-0V version is commonly used as main stage of a ventable relief valve.

product details

  • 38-150 LPM (10-40 GPM) maximum oil flows.
  • 245 Bar (3500 PSI) Maximum oil pressure.
  • Various spring ranges.
  • Industry common cavities.
  • Hardened parts for long life/low leakage.

Download PDF


Product Image

2 Way, Compensating / Reducing Valves

Typical application for the CP2 is in a proportional circuit to achieve pressure compensated flow control.The pressure compensator is located upstream of the orifice and is spring biased to an open position.

product details

  • 30-60 LPM (8-16 GPM) maximum oil flows.
  • 245 Bar (3500 PSI) Maximum oil pressure.
  • Various spring ranges.
  • Industry common cavities.
  • Hardened parts for long life/low leakage.

Download PDF


Product Image

2 Way, Restrictive Type Compensators

Typical application for the TCS is in a proportional circuit to achieve pressure compensated flow control. The pressure compensator is located downstream of the proportional valve and is spring biased to an open position.

product details

  • 38 LPM (10 GPM) maximum oil flows.
  • 245 Bar (3500 PSI) Maximum oil pressure.
  • Various pressure settings.
  • Industry common cavities.
  • Hardened parts for long life/low leakage.

Download PDF


Product Image

4 way, Priority Type Compensator with By-Pass Line

Typical application for theTCB is in a proportional circuit to achieve pressure compensated flow control. The pressure compensator is located downstream of the proportional valve to achieve a pressure compensated flow control on the priority line, opening a secondary -pass line, when the differential pressure becomes too high, for all flow in excess of that demanded the control orifice.

product details

  • 38 LPM (10 GPM) maximum oil flows
  • 245 Bar (3500 PSI) Maximum oil pressure
  • Various pressure settings
  • Industry common cavities
  • Hardened parts for long life/low leakage

Download PDF


Product Image

Featured Case Study

Featured Case Study Falcon Equipment
As the power infrastructure ages, maintaining power lines is becoming more labor intensive and the need for increased productivity and higher levels of safety is ever increasing. BC Hydro required a control system that would be safe to operate in close proximity to high voltage power lines while they are still active... read more »